Antes de irme a sobar, dejo un comentario interesante que acabo de leer en un video que he estado viendo en skynews (en cuanto al video, los 'expertos', por lo que he logrado comprender, no cuentan nada que no sepamos)
Brit Experts Examine Japanese Nuclear Crisis
A recent New York Times article said the Japanese felt that 50 tons of water per day are needed to keep one of the F-1 reactors cooled when shut down. This is well within the capacity of water cannons or fire trucks, but the flow seems much too low. With a reactor off (control rods in) or the fuel removed to cooling ponds it's said there is residual heating to a level of a few per cent of the reactor normal load from radioactive decay of isotopes in the fuel rods.
The largest F-1 reactor operated at 1100 Megawatts (MW). If when shut down its fuel was only emitting 2% of the usual heat it would generate 22 MW of heat. Each kilogram (kg) of water at 20 deg C poured per second onto fuel absorbs 0.3 MW of this heat by being raised to the boiling temperature of 100 deg C AND a further 0.4 MW by being evaporated into steam. With each (kg) absorbing 0.7 MW a total water flow of about 30kg/per second is needed, 60 times higher than the 50 ton per day figure...
Lo dejo traducido con google:
Un reciente artículo del New York Times dijo que los japoneses consideraron que 50 toneladas de agua al día son necesarios para mantener uno de los F-1 reactores refrigerados cuando se apague. Esto está en conformidad con la capacidad de los cañones de agua o camiones de bomberos, pero el flujo parece demasiado bajo. Con un reactor apagado (barras de control en) o el combustible trasladados a los estanques de enfriamiento se dice que se está calentando a un nivel residual de un pequeño porcentaje de la carga normal del reactor de la desintegración radiactiva de los isótopos en las barras de combustible.
El más grande de F-1 del reactor funciona a 1100 megavatios (MW). Si al cierre de su combustible sólo emite el 2% del calor habitual que generaría 22 MW de calor. Cada kilogramo (kg) de agua a 20 grados C por segundo vertido de combustible en absorbe 0,3 MW de este calor al ser elevado a la temperatura de ebullición de 100 ° C y un 0,4 MW más al ser evaporada en vapor. Con cada uno (kg) 0,7 MW absorber un flujo total de agua de la segunda sobre 30kg/per se necesita 60 veces más alta que la cifra de 50 toneladas por día ...