Yacht To Ibiza-V3 / Crypto: YTI

no puedes agotar el stock nunca.... tiene un sistema que le da fees a la pool tambien llamado auto liquidity pool y una parte de el 10% de las fees va para la pool asi que nunca se puede quedar si liquidez.
 
eso da igual, el mercado es libre
puedes comprar lo que quieras, me da igual si uno tiene el 10%, si los ha pagado ya veras como no los vende sencillamente para que caiga el precio....
 
y eso es lo importante, ya da igual que sean 5 duros que 20.000 euros....

lo importante es que estan seguros.
 
trolls? yo los llamaria Inversores AAA ...... jejeejej formas distintas de ver las cosas....
 
lo importante es que esto lo controlan las matematicas, y en las matematicas si creo.
 
"In Maths We Trust"

c = a * b


SafeMath

// SPDX-License-Identifier: MIT
Hacer clic para expandir...
pragma solidity >=0.6.0 <0.8.0;

/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}

/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}

/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: improve mul performance and reduce gas cost by emn178 · Pull Request #522 · OpenZeppelin/openzeppelin-contracts
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}

/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}

/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}

/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}

/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}

/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}

/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}

/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}

/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}

/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}

/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
Hacer clic para expandir...
 
Última edición:
ya llegan las invitadas....

c139c-15802130-1320728141354899-4897538202467827712-n.jpg
 
5$ de liquidez, has tirado la casa por la ventana macho.
Esto si que es querer pegar el pelotazo con mayusculas.
Metele algo de liquidez, anda, que si no no se puede ni comprar.
 

esta es tu factura.....


Value:
0.0025 BNB ($0.71)

Transaction Fee:
0.000820435 BNB ($0.2)

como que las fees es mas caro que la moneda?
 
Andreas Katsulas dijo:
5$ de liquidez, has tirado la casa por la ventana macho.
Esto si que es querer pegar el pelotazo con mayusculas.
Metele algo de liquidez, anda, que si no no se puede ni comprar.
Hacer clic para expandir...
no os enterais que eso es el caramelo en la puerta de un colegio, y luego venden todo lo suyo y a tomar por ojo ciego la moneda..... le estais haciendo el caldo rellenito a los ricos, que son los que pueden hacer monedas de la nada y meter 100 ethereum o lo que sea.....y luego haceis mas ricos a los ricos....


para eso las finanzas descentralizadas? se estan riendo de vuestras caras mandandoos a invertir a sus monedas y sitios que ellos te publicitan....

aqui lo importante es la confianza en el contrato, que va con matematicas.

y que crezca con el tiempo.... yo solo quiero que crezca a la vez que van subiendo los usuarios y ganemos todos, no de primeras sacarlo sobrevalorado y con las mismas ponerme a vender..... que es lo que hacen muchos, o sino como te explicas las curvas esas de salida......que se desploman todas un 70-90%...
 
Iniciar sesión o registrarte para responder aquí.
Volver